Bass; Deep Standby Mode Setting; Auto Standby Setting; System Standby Via Cec - Polk Mono Signa S4 Service Manual

11. Bass

Volume range is 0 - 8
Status LED indicates the current volume value using 5 Dot with dimming.
#1-#4 should have 2 step brightness. (50%, 100%)
Bass Value Action
#1 LED fast blinks white with 100% brightness
1 0
three times
2 1 #1 LED lights white with 50% brightness
3 2 #1 LED lights white with 100% brightness
• #1 LED Lights white with 100% brightness
4 3
• #2 LED lights white with 50% brightness
• #1 LED Lights white with 100% brightness
5 4
• #2 LED lights white with 100% brightness
• #1 LED Lights white with 100% brightness
6 5 • #2 LED lights white with 100% brightness
• #3 LED lights white with 50% brightness
• #1 LED Lights white with 100% brightness
7 6 • #2 LED lights white with 100% brightness
• #3 LED lights white with 100% brightness
• #1 LED Lights white with 100% brightness
• #2 LED lights white with 100% brightness
8 7
• #3 LED lights white with 100% brightness
• #4 LED lights white with 50% brightness
• #1 LED Lights white with 100% brightness
• #2 LED lights white with 100% brightness
• #3 LED lights white with 100% brightness
9 8
• #4 LED fast blinks white three times
After #5 LED animation completes, all LEDs
turn off immediately.

12. Deep Standby Mode setting

When Deep Standby Mode setting is changed, Status LED blinks as followings.
Status Action
#1, #3 LEDs light for 1 second, then blink twice
1 Deep Standby Mode is set to On
Color : #1 : Green, #3 :
#1, #3 LEDs light for 1 second, then blink twice
2 Deep Standby Mode is set to Off
Color : #1 : Red, #3 :

13. Auto Standby setting

When Auto Standby setting is changed, Status LEDs blinks as followings.
Status Action
#1, #3 LEDs light for 1 second, then blink twice
1 Auto Standby is set to On
Color : #1 : Green, #3 : White
#1, #3 LEDs light for 1 second, then blink twice
2 Auto Standby is set to Off
Color : #1 : Red, #3 : White
Change Bass
from 2 to 0
☀ 〇 〇 〇 〇
● 〇 〇 〇 〇
● 〇 〇 〇 〇
● ● 〇 〇 〇
● ● 〇 〇 〇
● ● ● 〇 〇
● ● ● 〇 〇
● ● ● ● 〇
● ● ● ☀ 〇
☀ 〇 ☀ 〇 〇
Blue
☀ 〇 ☀ 〇 〇
Blue
☀ 〇 ☀ 〇 〇
☀ 〇 ☀ 〇 〇

14. System Standby via CEC

When System Standby via CEC is changed, Status LEDs blinks as followings.
Status Action
System Standby via CEC is set to #1, #3 LEDs light for 1 second, then blink twice
1
On Color : #1 : Green, #3 :
System Standby via CEC is set to #1, #3 LEDs light for 1 second, then blink twice
2
Off Color : #1 : Red, #3 :
15. IR Learning
Starting up : While the power is On, hold down buttons "Source" for at least 3 seconds.
Exit : While the power is On, hold down buttons "Source" for at least 3 seconds.
Status Action
Move white lighting repeatedly to left and
1 Waiting IR command of Sound Bar
right (0.1sec step)
All LEDs blinks white while waiting to receive
2 Waiting IR command of TV
the TV IR codes.
Move white lighting left to right twice. (0.1 sec
3 Receives TV IR code
step)
Same as "IR Learning (waiting IR command of
4 In analyzing process
TV)"
5 Success #5 LED blinks
6 Error #5 LED blinks
7 Exit #5 LED blinks white three times
16. Protection
Status Action
#1 LED fast blinks
1 When Protection activates
power code

17. USB Update

White USB updating, Status LED indicates current progress.
Status Action
Plug in USB memory and loading
1 #1 LED fast blinks white
file
2 Check update file #1 and #2 LEDs fast blink white
Success entry USB update, please
3 #1-3 LEDs fast blink white
wait.
4 Update success #1-4 LEDs light white for 5 seconds
#5 LED fast blinks
5 Update Fail, please retry
update
53
☀ 〇 ☀ 〇 〇
Green
☀ 〇 ☀ 〇 〇
Green
☀ ⇄ ⇄ ⇄ ⇄
☀ ☀ ☀ ☀ ☀
☀ → → → →
☀ ☀ ☀ ☀ ☀
Green three times
〇 〇 〇 〇
Red three times
〇 〇 〇 〇
〇 〇 〇 〇
Red until unplugging the
☀ 〇 〇 〇 〇
☀ 〇 〇 〇 〇
☀ ☀ 〇 〇 〇
☀ ☀ ☀ 〇 〇
● ● ● ●
Red until complete the
〇 〇 〇 〇
☀
☀
☀
〇
☀