Special Mode Setting Button - Polk Mono Signa S4 Service Manual

SPECIAL MODE

Special mode setting button

b No. 1-1 : While the power is on- down buttons "A", "B", and "C" for at least 5 seconds .
b No. 1-2 : While the power is on, hold down buttons "A" on the remote control for at least 10 seconds.
b No. 2 : While the power is on, hold down buttons "A", "B", and "C" for at least 5 seconds .
No. Mode
1-1 Version Display Mode for MCU
1-2 Version Display Mode for Region
2 Log Submission Mode
3 Initialization Mode
4 Locale settings and confirmation
5 Retail Mode
Button A Button B Button C
The firmware version is display.
SOURCE VOL- VOL+
(See 1. Version Display
Displays the region.
voice adjust 1 - -
(See 1. Version Display
This mode gets the Work log.
Bluetooth Vol- Vol+
(See 2. Log Submission
All LEDs light up three times after initialization.
Vol+ Source Power
(See 3. Initialization
(See 4. Locale settings and
- - -
(See 5. Retail
- - -
Top side
Front side
Rear side for INTL
Rear side for NA
Mode)
Mode)
Mode)
Mode)
confirmation)
Mode)
X SOURCE VOL- VOL+
Bluetooth
LED1 LED5
46
Descriptions
voice adjust1