Neolab D-6011 User Manual

User Manual
neoLab-Analog Magnetic Stirrer
Item N° . D-6011
Users should read this manual carefully, follow the instructions and procedures, and be aware of the
dangers while using this instrument.

Safety Instructions:

Warning!
Read the operating instructions carefully before use the instrument
•
Ensure that only trained staff work with the instrument
•
Protective ground contact!
Make sure that socket must be earthed (protective ground contact) before use
•
When work, wear suitable protective clothing to avoid the risk from:
•
Splashing and evaporation of liquids
•
Release of toxic or combustible gases.
•
Set up the instrument in a spacious area on a solid, clean, non-slip, dry and fireproof surface, do not
•
operate the instrument in explosive atmospheres with hazardous substances or under water.
Gradually increase the speed, reduce the speed if :
•
The stirring bar breaks away because of too high speed
•
The instrument is not running smoothly, or container moves on the base plate.
•
Temperature must always be set to at least 25° C lower than the fire point of the media used.
•
Beware of hazards due to:
Flammable materials or media with a low boiling temperature
•
Overfilling of media
•
Unsafe container
•
Process pathogenic materials only in closed vessels.
•
If the case of the stirrer bar is PTFE, please note:
•
Elemental fluorine, three fluoride and alkali metals will corrode the PTFE and Halogen Alkanes make it expansion
at room temperature.
neoLab Migge Laborbedarf-Vertriebs GmbH, Rischerstr. 7-9, 69123 Heidelberg
neoLab Berlin Tel. 030 / 30 87 45-0
Tel. 06221 / 84 42-0 info@neolab.de www.neolab.de
neoLab München Tel. 089 / 35 61 88 -0