Advertisement
INTRODUCTION
Thank you for purchasing a XPOWER BR blower! XPOWER Manufacture, Inc. with over 25 years of
manufacturing experience is bringing a series of products with the most advanced technology in today's
market. Your new XPOWER blower was engineered with top quality motors and superb housing to provide
strong and lasting performance. All our products have a fully integrated design with state-of-the art
miniaturization, allowing them to be light weight, quiet and rugged without sacrificing power or durability.
Trust in XPOWER for all of your air blower needs. Enjoy!
OPERATION
1) With the unit unplugged, carefully place the XPOWER unit on stable, flat, and dry surface. 2) Snugly
attach your inflatable tube around the exhaust opening by using the Velcro strap or any other form of
tightener. 3) Plug the cord into a grounded G.F.C.I. outlet only, the use of a 3-prong to 2-prong adapter is
strictly prohibited. 4) Turn on the switch to make sure the blower is operating correctly and the inflatable
functions properly. 5) All blowers in operation must be supervised at all times.
STORAGE
Always store unit when not in use. Store indoors in a dry and cool environment free from debris and/or
possible obstructions that might affect the unit.
SAFETY
1) Never place the XPOWER device in close proximity to any heat source or open flame. The inflatable is
flammable and could cause a fire and serious injury if not handled properly.
2) Do not operate the unit close to any dangerous areas such as explosive gases, flammables, heaters
and unventilated environments that may result in explosions or electrical hazards.
3) Do not operate the blower without the inflatable attached because the blower must have back pressure
in order to avoid any damage to the motor.
4) Keep children away from the unit at all times while in operation and/or plugged in. This product is not a
toy and should only be used for its intended purpose.
5) Do not put fingers or other objects in any part of the unit while it is in operation and/or plugged in.
6) Do not operate in pooled or accumulated water to avoid electric shock.
7) Outdoor use: while the blower is being operated outdoors, it must be plugged into a grounded G.F.C.I.
outlet only. The motor must be kept dry at all times. If the unit becomes wet, turn the electricity off and
with the blower in the off position; thoroughly dry the unit before the next operation.
8) Indoor use: use only with a grounded plug.
9) Never use a cord that has cuts, breaks, or any other apparent damage as harmful, electrical shock
may occur.
10) Make sure the power source is sufficient to meet the requirements of the blower (see specifications).
an extension cord is being used, it must have no less than a 14-3 gauge wire.
2
Advertisement
