Field Controls MC2025-11 Installation Manual

INSTALLATION INSTALLATION
WARNING: Always shut off the electrical power supply before working on the appliance. WARNING: Alway
1. 1. Remove the metal fi lter cabinet from the carton. Remove the metal fi lter cabinet from the carton.
2. 2. Remove the access panel door and pull the media fi lter (in plastic bag) out of the cabinet. Remove the access panel door and pull the media fi lter (in plastic bag) out of the cabinet. DO NOT
install the media fi lter with the plastic bag around it. To remove door grasp handle and place palm install the media fi lter with the plastic bag around it. To remove door grasp handle and place palm
on top of door panel and push down. on top of door panel and push down.
3. 3. Position cabinet with access panel available for easy media fi lter replacement. The access panel Position cabinet with access panel available for easy media fi lter replacement. The access panel
MUST be accessible to remove and replace the media fi lter. (NOTE: Allow a minimum clearance space MUST
be accessible to remove and replace the media fi lter. (NOTE: Allow a minimum clearance space
of 26 inches for fi lter access). Refer to Figures 1 and 2 below for proper installation information. of 26 inches for fi lter access). Refer to Figures 1 and 2 below for proper installation information.
FIGURE 1: Cabinet installation
4. 4. Position the fi lter cabinet onto return air side of the appliance. Duct transitions may be required to Position the fi lter cabinet onto return air side of the appliance. Duct transitions may be required to
properly mount the fi lter cabinet. properly mount the fi lter cabinet.
5. 5. When the fi lter cabinet is mounted directly to the appliance or existing duct, mark the inside opening When the fi lter cabinet is mounted directly to the appliance or existing duct, mark the inside opening
of the fi lter cabinet and all mounting screw locations. of the fi lter cabinet and all mounting screw locations.
INSTALLATION MANUAL
Media Air Cleaner
s shut off the electrical power supply before working on the appliance.
FIGURE 2: Door clearance information
P/N 780103500 02/19 Rev B
DO NOT