Page 1
Painted Farmhouse Cabinet - OTNQ5 & OTNQ6 Thank you for purchasing our Pie Safe / Bookcase. Assembly of this product requires a phillips screwdriver. It is helpful to have a second person availble during the assembly of this product. Pndt Frmhs Cabinet...
Page 2
Lay out parts on a non-abrasive surface to avoid scratching finish. STEP 1 Identify and count all parts using diagram above. STEP 2 Identify and count hardware. Pndt Frmhs Cabinet 2 of 4 6/27/17...
Page 3
STEP 3 Lay Top Panel (A) upside down on non-abrasive surface. Attach Left Side Panel (B) to Top Panel (A) using 2 M6 * 35MM Bolts (I). Use Wrench (Q) to install Bolts. Position Back Panel (D) in to grooves on Left Side Panel (B) and in Back Rail on Top (A).
Page 4
STEP 6 Position partially assembled case upright. Place 2 Shelves (F) in to the case. NOTE: Threaded inserts in the shelves should be facing down and aligned with the thru holes in the shelf supports on the Left and Right Ends inside the case. Attach the Shelves to the Shelf Supports on the Left and Right Ends using 4 M6 30MM Bolts (J).