PESOLA PTS6K-MF Quick Start Manual

Quick Start Guide
Multifunctional bench scale
PTS6K-MF / PTS15K-MF
Important: Place scale on solid surface, use the build-in level indicator to adjust the
stands.
Power supply:
The scale is equiped with a rechargeable battery pack.
If the symbol is displayed, the battery must be recharged.
Connect the power cable.
Switch ON-OFF:
Power switch on the lower left side, marked with OFF ON
g
Display after system Test: 0.0
STABLE
Unit selection:
Push key to select weighing unit kg or lb.
Weighing without container (without TARE function):
g
If display not 0.0 , push key.
Place parts to the center of the platform.
Wait until is displayed.
STABLE
The weight is displayed.
Weighing with container (with TARE function)
Place container on the platform.
Push key. Display: Net 0.0 g
STABLE
Place parts into the container.
Net weight is displayed.
Reset TARE value: Push key.
Counting function:
(If a container is used, note „Weighing with container")
Select reference batch: Push key. Display: Net C 10 Pcs.
For further reference batches (20, 50, 100), use key.
For best results, select the highest possible batch.
Place selected batch on the platform, then push key.
Display:
.
Place parts to be counted on the platform.
The number of pieces (Pcs) is displayed.
Back to weighing function: Push key.