Safety Instructions; Technical Data; Operation - Hamron 604-000 Operating Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

ENGLISH
Read these instructions carefully before use!
The compressor has an automatic thermal cut-out that turns off the pump if it overheats. The
thermal cut-out resets the compressor automatically once the compressor has cooled.
Allow the compressor to cool before storing it away.
The compressor does not require oil or lubrication.
The compressor can only be powered with 12V DC.
Before use, check that the car's 12V outlet matches the compressor's voltage requirements. See
the car's instruction manual for information about the 12V outlet.
Do not use the compressor near flammable materials.
Do not use the compressor for purposes other than those for which it is intended.
Always be careful when the compressor is used near children.
Do not use the compressor close to anyone's face.
The compressor must not be exposed to wet conditions.
NOTE: The compressor is only intended for temporary use. If used for a long period the
compressor can overheat. Switch off the compressor and allow it to cool for about 30 minutes if the
metal parts get very hot.
Rated voltage
Air volume
Maximum pressure
Accessories
Power consumption
Air hose
12V power cord
NOTE: To avoid overheating the compressor should not be used for more than 10 minutes without a
pause for normal loads. If you need to pump more, you should wait for 10 minutes before starting the
compressor again.
Pumping tyres
The car should be running when using the compressor to ensure it works at maximum efficiency.
The car must be standing in a well ventilated location when it is running.
Connect the contact to the 12V outlet.
Connect the hose nozzle to the tyre valve.
Start the compressor.
Turn the compressor off and disconnect the nozzle from the tyre valve when the required pressure
has been reached.
Pumping bicycle tyres, balls and inflatable mattresses, boats and toys
Connect the contact to the 12V outlet.
ENGLISH

SAFETY INSTRUCTIONS

TECHNICAL DATA

DESCRIPTION
1.
2.
3.
4.
5.

OPERATION

8
12 VDC
40 litres/min
10 bar
3 nozzles
13A under load
60 cm
3 metres
Carrying handle
Manometer
Power switch OFF/ON
12V contact
Air hose

Advertisement

Table of Contents
loading

Table of Contents