GE GTH22KBR Owner's Manual & Installation Instructions page 4

About the controls on the refrigerator.
The controls will look like one of the following:
COLDER
4
ADJUST FREEZER TEMP ACTIVATE LOCK
WARMER
9 IS COLDEST
Initially, set the refrigerator control at 5 and the freezer control at 5
and allow 12–24 hours for the temperature to stabilize.
Several adjustments may be required. Adjust the controls one
increment at a time, and allow 12 hours after each adjustment for
the refrigerator to reach the temperature you have set.
Setting the controls to 0 stops cooling in both the refrigerator and
freezer compartments but does not shut off electrical power to
the refrigerator. On some models, only the refrigerator control has
a 0 setting.
Touch pad controls
• Setting either control at 0 will automatically set the other control at 0.
The zeros will blink until you set the controls.
• If both controls are set at 0 and either COLDER pad is pressed, the
controls will automatically reset to 5.
Control settings will vary based on personal preferences, usage and
operating conditions and may require more than one adjustment.
Locking the Controls
(on some models)
This feature allows you to lock the controls
so the settings cannot be changed.
To lock the controls:
Set the controls to the desired settings.
Press and hold the lock pad for
3 seconds.
When the controls are locked, the indicator
light will come on and the control settings
will not be displayed.
ADJUST REFRIGERATOR TEMP
HOLD
COLDER
3 SECS
9 IS COLDEST
To unlock the controls:
Press and hold the lock pad for 3 seconds.
After unlocking the controls, the settings
will be displayed, the lock indicator light
will go out and the settings can be changed.
WARMER