Advertisement
VISE OVERVIEW:
External Hex on left end of vise
52 family 12mm
96 family 16mm
(Only use external hex to torque vise)
6mm internal hex on both ends of
leadscrew for speed travel
Left Hand Thread Pusher
Indicated with L
Left Hand Alignment Indicator
Align Thread Pusher with L
Arrow indicates direction to close
Torque maximum listed on each vise
Jaws are not a matched set and can go on
either pusher in either direction
Right Hand Thread Pusher
Indicated with R
Leadscrew assembly
Jaws Centering Pins
2D Bar Code
For quick access to QuickSpecs™
Pull Studs for 52 or 96 systems
Advertisement
