GE GTH18ISXSS Owner's Manual And Installation Instructions page 17

7 TRANSFER REFRIGERATOR DOOR
HANDLE TO THE RIGHT (CONT.)
Transfer the door plug
button to the opposite
side.
Reinstalling the handle:
Attach the handle to the
right side of the door.
Plastic handle:
Line up the handle with the
screw holes in the top of the door
and tighten the screws.
screw into the bottom of the handle.
Reinstall the handle plug.
Stainless steel handle
(on some models):
Attach the handle
to the fastener and
tighten with the 3/32"
Allen wrench
(supplied). Line
up the handle with the
screw holes in the top
of the door and
tighten the screws.
Installation Instructions
Button
1
2
Install the
3
4
Handle
Plug
2
1
TRANSFER FREEZER DOOR
8
HANDLE TO THE RIGHT
Plastic handle:
Remove the screws
holding the handle to
the top and bottom of
the door. Remove
handle. Move the
plug button on the
right side of the door to
the handle screw hole
on the left side.
Stainless steel handle
(on some models):
Remove the two
screws holding the
handle to the bottom
of the door. Loosen the
set screw with the
3/32" Allen wrench
(supplied) and remove
the handle.
Remove the handle
fastener with the 3/16"
Allen wrench
(supplied). Transfer
the fastener to the right side and move the GE badge
to the left side of the freezer door. Remove the paper
covering on the adhesive backing prior to attaching
the badge to the door.
Reattach the handle on the opposite side using the
holes closest to the edge of the door.
Plastic handle:
Line up the handle
with the screw hole in
the top of the door and
tighten screw.
the two screws into the
bottom of the handle.
Move the plug
button on the right
side of the door to the
handle screw hole on
the left side.
17
1
2
2
Fastener
1
3
Plug
Button
Install
3
Plug
Button
3
1
2