Summary of Contents for Organic Lighting Systems PCB Deco
Page 1
USER MANUAL PCB Deco, Power, High Power & Photon Table of Contents Warning Product Information Product Dimensions Bending Radius Cutting Instructions Connecting & Waterproofing Connections IP40 Solder Connections IP20 General Power Supply Cable Selection Product Specifications Photometric Diagram Symbols PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLATION & LEAVE A COPY FOR THE END USER/ MAINTANANCE ENGINEER FOR FUTURE REFERENCE.
This product is intended for professional use only! This product must be installed by a qualified and certified installer according to local rules and guidelines. Organic Lighting Systems, Inc. cannot be held liable for (consequential) damage and/or injuries due to unintended use and/or installation errors.
Cutting Instructions User Manual | liniLED® PCB Deco, Power, High Power, Photon 10ft lengths require a second person's assistance. The LED strip has to be unreeled on a horizontal surface at the time of installation. Do not unreel the spool of LED strip before installation. Lengths over 10ft should be installed with the help of a second person to support the strip to ensure that the connector is not stressed.
Page 4
Choose your Connector - IP20 User Manual | liniLED® PCB Deco, Power, High Power, Photon Depending on the area where the liniLED® LED strip is installed we off er a range of solutions to cope with external factors. The product portfolio for the liniLED® PCB LED strip includes a IP20 connector.liniLED PCB requires either an IP20 connector or a soldered connection.
Page 5
Solder Connection Assembly (IP20) User Manual | liniLED® PCB Deco, Power, High Power, Photon 0.02 in 2 0.31 in Solder the wires to the PCB. We advise to use a Pre-solder the connector pads. cable with an area not bigger then 0.5 mm2.
Hand over the instructions to the end-user and/or those responsible for installation, maintenance and usage. - Organic Lighting Systems, Inc. cannot be held responsible for improper handling, product installation, usage or storage.
Power Supply User Manual | liniLED® PCB Deco, Power, High Power, Photon 120-277V AC Power Supply 24 V IP20 Control Organic Lighting, 205 W. Blueridge Avenue, Orange, CA 92865 | 626.969.6140 | www.organiclighting.com...
Cable Selection User Manual | liniLED® PCB Deco, Power, High Power, Photon The following chart gives the maximum 24V supply cable run lengths based on 22AWG, 20AWG, 18AWG, 16AWG and 14AWG wire gauge to avoid voltage drop to the strips, with a 3ft liniLED connector cable length.
Page 9
Cable Selection User Manual | liniLED® PCB Deco, Power, High Power, Photon 1. Color Temperature POWER 2400 - 6500K 2. LED Strip Length 3. Voltage 24V DC 25V DC 24V DC 25V DC 24V DC 25VDC 24V DC 25V DC 4.
Page 10
User Manual | liniLED® PCB Deco, Power, High Power, Photon Cable Selection Depending on the area where the liniLED® LED strip is installed we off er a range of solutions to cope with external factors. The product portfolio for the liniLED® PCB LED strip includes a IP20 connector.
Page 20
Symbols UL is a world leader in product safety testing and certification. UL sets standards and tests products to make sure they meet standards. The ETL Listed mark indicates that your product has been tested by Intertek and found in compliance with accepted UL standards.