Related Manuals for Organic Lighting Systems liniLED Top High Power
Summary of Contents for Organic Lighting Systems liniLED Top High Power
- Page 1 LED strip manual liniLED® Top High Power 30 mm ADAM V DC IK08 RoHS IP40/IP68 CLEANING FROST POOL CL POOL CL GLOW WIRE BEND S D C M 850 °C...
-
Page 3: Table Of Contents
liniLED® Top High Power Technical notes Top High Power - Product drawings Product information Product specifications Cable selection Area advice Product care and handling Cutting instructions Solder Connect IP40 Uninstalling the connector Power supply Symbols... -
Page 4: Technical Notes
Technical notes Read the instructions and safety precautions before installation, usage and storage of the products to secure safety of the user and reliability of the product. - Hand over the instructions to the end-user and those responsible for installation and usage. - Triolight B.V. -
Page 5: Top High Power - Product Drawings
Top High Power - Product drawings LED strip front view LED strip top view Product information The liniLED® Top High Power (HP) LED strip (IP40/IP68*) is a high quality, flexible LED strip with a unique co-extrusion technology. The combination of high quality and exceptional flexibility, allows for an endless range of indoor and outdoor applications. For usage in wet enviroments, use the liniLED®... -
Page 6: Cable Selection
Cable selection Cable selection 1 = Select colour temperature. Result Top/Side Connector (1000 mm) 2 = Select LED strip length. 3 = Select output voltage. 4 = Select cable cross section. Result = Maximum cable length based on the cable thickness and power supply voltage. -
Page 7: Area Advice
Area advice Depending on the area where the liniLED® LED strip is installed we off er a range of solutions to cope with external factors. The product portfolio includes a range of IP40 and IP68 connectors. Below the diff erent connectors are displayed for use in diff erent environments. (IP40) (IP20) Indoor environment |... -
Page 8: Product Care And Handling
Product care and handling 30 mm 30 mm Maximum bending radius is 30 mm. Solely bend up or downward. Do not compress or stretch the LED strip. Do not bend the LED strip sidewards. Do not twist the LED strip. The LED strip has to be unreeled on a horizontal surface at the time of installation. -
Page 9: Cutting Instructions
Cutting instructions Work in an ESD protected environment. Make use of an anti-static Turn off the power before cutting the LED strip. strap. Side view | Make sure the cut is vertical as illustraded in the image Top view | Make sure the cut is vertical as illustraded in the image above. - Page 10 Cutting instructions Place the liniLED® LED strip on the base of the cutting tool. Not doing so may result in a deformed LED strip. LED strip manual | liniLED® Top High Power...
-
Page 11: Solder
Solder Work in an ESD protected environment. Make use of an anti-static Turn off the power. Make sure the wires are not under electric strap. current. 8 mm 0.5 mm Top view | Only cut the LED strip extrusion on the dotted line of Solder the wires to the PCB. - Page 12 Solder Pre-solder the connector pads. Pre-solder the wires. 350o C 350o C Solder the wires to the connector pads. Connect the liniLED® LED strip to the power supply (24 V DC) con- 350o C stant voltage. LED strip manual | liniLED® Top High Power...
-
Page 13: Connect Ip40
Connect IP40 The liniLED® IP40 Connector consists of: End cap (1), Shell (2), Take into account the direction of the arrow on the bottom of the Connector (3), Clamp (4). liniLED® LED strip and allign it with the arrow on the clamp (4). Side view | Slide the clamp Place the shell over the LED strip. - Page 14 Connect IP40 Slide the clamp over the connector and make sure that the Slide the shell partly over the clamp (4). arrow is on the upper side. ‘ Click ’ Test the liniLED® LED strip before you slide it fully over the clamp (4). Slide the shell entirely over the clamp and push firmly until it...
-
Page 15: Uninstalling The Connector
Uninstalling the connector Firmly grab the outer shell and gently grab the liniLED® LED strip. Gently wiggle the connector and pull in opposite direction. The connector should look like this when it is removed. Firmly press the sides of the shell and pull gently while holding the cable to remove it. -
Page 16: Power Supply
Power supply Turn off the power before connecting the LED strip to the power 230 V AC liniLED® Power Supply 24 V DC liniLED® LED Driver (Optional) IP40 IP40 IP67 Connect the LED strip as indicated in the figure above. The wires should be connected as follows: Red (+) and Black (-). Insert the power plug. -
Page 17: Symbols
Symbols Manufacturer’s declaration that the product meets the applicable EC directives. Suitable for mounting on all surfaces and suitable to cover with insulating material. Passed glow wire test at 850 degrees Celsius. Global European regulations specify 650 degrees Celsius by default. GLOW WIRE 850 °C Restriction of Hazardous Substances (RoHS): product complies with the RoHS directive and each homogeneous material does not exceed... - Page 18 Disclaimer The published information is checked to be as accurate as possible, however Triolight B.V. or any reseller of liniLED® cannot be held liable for any damages resulting from errors or outdated information. Triolight B.V. reserves the right to modify the information without informing the customers. When this document is printed or downloaded, please check for the latest version on the internet, the most up to date information will be published on www.liniLED.com.
- Page 20 liniLED® is a registered trademark of Triolight B.V. Subject to misprints, errors and modifications. No legal rights can be derived from this document. V1218...