Table of Contents
Advertisement
2.4.4
Internal USB 2.0 Installation
1.
Undo 6 screws to remove the bottom cover.
2.
Loosen the screw and adjust bracket size in accordance the USB dongle size.
3.
Secure the screw and replace bottom cover and secure with screws.
Note!
Use only the top internal USB2.0 connector. Middle and bottom connec-
tors are reserved, not connected.
2.4.5
PCI Riser Card Installation
AIIS-5410 supports PCIe x8 and PCI socket and you can find PCI riser card in acces-
sory box.
1.
Undo 6 screws and remove the bottom cover.
2.
Undo 4 screws to remove HDD tray.
3.
Undo 2 screws to remove riser card bracket.
4.
Undo 4 screws to remove PCIe x8 riser card and replace with PCI riser card.
5.
Assemble riser card bracket and secure the screws and replace HDD bracket
and bottom cover.
AIIS-5410P User Manual
2
3
4
20
3
4
Advertisement
Table of Contents
