Setup Projection Menu; Setup Screen Type Menu; Setup Power Settings Menu; Setup Security Menu - Acer XL1220 User Manual

UsI G THe PRoJeCToR
Setup menu
otee: Functions vary depending on model definition.

setup projection menu

Projection
Select the preferred projection between front, rear, ceiling-top, and rear-top.

setup screen type menu

screen Type (for WXGA/1080P models)
Choose the screen type from 16:9 and 16:10.

setup power settings menu

Direct Power on
Choose "On" to activate Direct Power mode. The projector will automatically power on when AC power is supplied,
without pressing the "Power" key on the projector keypad or on the remote control.
signal Power on
Choose "On" to activate Signal Power mode. The projector will automatically power on when a signal is detected,
without pressing the "Power" key on the projector Keypad or on the remote control.
otee:
Only supported on HDMI 1, HDMI 2 and VGA In Connector.
Auto Power off (min.)
Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the
projector. The projector will automatically power off when the countdown has finished (in minutes).
Power mode (standby)
Set the power mode setting.
‡ Activee: Choose "Active" to return to normal standby.
‡ eco.e: Choose "Eco." to save power dissipation further < 0.5W.
Usb Power (standby)
Enable or disable the USB power function when the projector is in standby mode.
otee:
This item is grayed out if the power mode is Eco.

setup security menu

security
Enable this function to prompt for a password before using the projector.
‡ one: Choose "On" to use security verification when the turning on the projector.
‡ offe: Choose "Off" to be able to switch on the projector without password verification.
security Timer
Can be select the time (Month/Day/Hour) function to set the number of hours the projector can be used. Once this
time has elapsed you will be requested to enter your password again.
42 English