Advertisement
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
STEP 11 : Connect the Handles(I) to the Doors(O,P)
with 2 Handle Screws(J) each handle. The open side
of the handle should face toward the outside of the
unit.
STEP 13 : Place all Cam Caps(B) and Plugs(C) in
place. You are now ready to connect the single/mul-
tiple unit top.
(To connect top see top instructions also enclosed.)
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Stand Up Storage Cabinet LSC4136 • INSTRUCTIONS
J
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 12 : Close the doors(O,P) and place Lock
Lip(M) on the Top Support(R) centered in relation to
the lock on the Right Door(P). Use two Lock Screws(L)
to attach locking lip flush to the front side of Top Sup-
port. The open side of the Lock Lip should be facing
the back of the unit.
Advertisement
