Regency LSC4136 Instructions

You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
Hardware :
A: Cam Pin(13) • B: Cam Cap(12) • C: Cam Plug(4) • D: Wood Screw(4) E: Small Screw(32)
F: Hinge(4) G: Hinge Mount(4) • H: Glides(4) • I: Handle(2) • J: Handle Screw(4) K: Shelf Pin(4)
L: Lock Screws(4) • M: Lock Lip • M: Keys(2)
A B
C
Parts: O: Left Door • P: Right Door • Q: Bottom Stringer • R: Top Support(2) • S: Bottom • T: Sides(2)
U: Shelf(2) • V: Back
O
P
Figure 1: To open Cam, point
arrow toward Cam Pin hole.
To lock Cam, turn clockwise.
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Stand Up Storage Cabinet LSC4136 • INSTRUCTIONS
D E
F
S
R
Q
Any problems or questions call Regency Office Furniture at 1-866-816-9822
G
I
H
T
STEP 1 : Insert 1 Cam Pin(A) into Back(V) and connect/
tighten(figure 1) the Bottom(S) to the back. Also connect Bot-
tom Stringer(Q) as shown below.
A
Q
K
J L M
U
V
S
N
V
V