Advertisement
You will need 2 person(s) for this assembly. You will need a Phillips head screw driver.
STEP 7 : Connect 4 Hinges(F) to the Doors(O,P) with
2 Small Screws(E) each hinge. There are holes that
mark the location of the screws to aid in alignment.
F
O
STEP 9 : Connect 4 Hinge Mounts(G) to the Sides(T)
with 2 Small Screws(E) each Mount. Ensure that the
screw on the mounts are toward the back of the unit
when attached.
IMPORTANT NOTICE:
● Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
● Check to be sure that you have all parts and hardware.
● Remove all wrapping materials, including staples & packing straps before you start to assemble.
● Do not tighten all screws/bolts until completely assembled.
● Keep all hardware parts out of reach of children.
Stand Up Storage Cabinet LSC4136 • INSTRUCTIONS
F
P
F
F
Any problems or questions call Regency Office Furniture at 1-866-816-9822
STEP 8 : Connect 4 Hinge Mounts(G) to the Sides(T)
with 2 Small Screws(E) each Mount. Ensure that the
screw on the mounts are toward the back of the unit
when attached.
G
STEP 10 : Connect Doors(O,P) to Mounting
Brackets(G) on the Sides(T).
STEP 10A : Screw(10A) from bracket(A)
interlocks with hinge(B) opening just as
screw(10B) on hinge(B) interlocks with mount(A)
opening.
Note..The screw 10B is an adjustment for the door
position. Turn right to adjust door to center and
left to adjust toward the side.
10B
10A
A
G
B
Advertisement
