Moving The Refrigerator - GE GSCS3KGYSS Owner's Manual & Installation Instructions

MOVING THE REFRIGERATOR

LOADING THE REFRIGERATOR ONTO A
1
HAND TRUCK
Leave all tape and door pads on doors until the
refrigerator is in its final location.
To move the refrigerator, use a padded hand
truck. Center the refrigerator on the hand truck
and secure the strap around the refrigerator.
DO NOT OVERTIGHTEN THE STRAP.
REMOVE THE BASE GRILLE
2
Remove the grille by removing the two
Phillips head screws.
Installation Instructions
19
If the refrigerator must go through any
entrance that is less than
38" wide, the doors must be removed.
Proceed to Step 3.
DO NOT remove the handles.
If all entrances are more than
38" wide, skip to Installing
the Refrigerator.
DISCONNECT THE WATER COUPLING
3
(on some models)
If the refrigerator has a water dispenser, there
is a water line from the cabinet into the bottom
hinge on the freezer door that must be
disconnected.
To disconnect, push in on the white collar of
the coupling and pull out the tubing.
Bottom
freezer
hinge
White collar