Changing The Tool - Fein AKFH18-5 Instruction Manual

Changing the tool.

Before mounting or replacing application tools or accessories, remove the bat-
WARNING
tery. This preventive safety measure rules out the danger of injuries through
accidental starting of the power tool.
Press the locking button only when the motor is stopped.
Dismounting the guide roller
(figure 5).
Press the locking button fully through and
hold it in place.
Lossen the guide roller with the (4 mm) Allen
key. Then remove the guide roller.
Fig. 5
2.
3.
en
Allen key
4 mm
Guide roller
1.
Locking button
19