Altronix Trove T1SAK3F4 Installation Manual page 5

1. Fasten spacers onto metal pems configuration (A) of backplane (Fig. 4, pg. 5).
2. Position SALTO modules over corresponding spacers and mount them utilizing pan head screws (provided) (Fig. 4a, pg. 5).
3. Mount backplane to enclosure with hardware.
Access Controller Position Chart for the Following Models:
SALTO Access Controller
CU42E0, CU4200 or CU4EB8
Fig. 4
Altronix - eFlow104NB
AC1
L G N NC
AC FAIL
Altronix - eFlow102NB
AC1
L G N NC C NO NC
AC FAIL
IN GND IN GND IN GND IN GND IN GND IN GND IN GND IN GND
1 2 3 4 5 6 7
F1 F2 F3 F4 F5 F6
NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM
OUTPUT 1 OUTPUT 2 OUTPUT 3 OUTPUT 4 OUTPUT 5
Altronix
ACM4
-- + -- +
POWER CONTROL
+INP- T +RET-
NO C NC
INTERFACE
FACP
Trove SALTO Kits Installation Guide
T2SAK75F12: Configuration of SALTO Modules:
AC DC
1 min enable
C NO NC C NO TRIGGER EOL NO GND
2 hr disable + AUX -
BAT FAIL SUPERVISED RESET
AC DC
1 min enable
C NO NO GND
2 hr disable TRIGGER EOL + AUX -
BAT FAIL SUPERVISED RESET
FACP
TRIGGER
TRG
INPUT
8
F7 F8
O N O N O N O N
1 1 2 2 3 3 4 4 1 1 2 2 3 3 4 4
Altronix
ACM8
MAIN
10A 250V
OUTPUT 6 OUTPUT 7 OUTPUT 8
IN2 Fuse
+ INP1 - + INP2 -
Altronix - PDS8
A A
A A
A A
Pem Mounting
A
Fig. 4a
Backplane
Spacer
HS4 Module
Pan Head Screw
Pem
- 5 -