4.2.2
Current LCD monitor
Step 1. Install the monitor bracket.
Step 2. Remove the balancer fixing screws.
Nut
After removing the fixing
screws, confirm that the
balancer is adhered to
GOM with the correct
posture.
Service Information
BRAKT, MONITOR
LE6-M1312-E1
4mm L14mm (Qty: 4)
BALANCER
LE7-M131L-11
GOM (LE7-M132M-00)
Shockproof rubber
1)
Remove the fixing screws
2)
Remove the nuts.
3)
Install the monitor.
The screws are installed to the back of the monitor.
Use the screws and install the monitor to the monitor bracket.
SI1604009E-002= S20, S10, M20, M10 and D10 installation procedures
23/34
For Service Engineer