Table of Contents
Advertisement
Fixed console is used to install MONZUN heaters on a supporting vertical structure. One pair of fixed
consoles is used for one heater.
Swivel console for installation of MONZUN heaters on a supporting vertical structure allowing the device
to rotate on both sides. After installation, the swivel console must be firmly fixed. In this way, the heater
is attached only to the hinge points located on the bottom panel.
Note: The heater must not be in collision with the flue gas outlet and the gas supply.
The roof section is designed to be installed in the roof opening, serves to fasten the roof head. It consists
of an oven with dimensions F x F and a length of 600 mm and four free rails, which are mounted
according to the roof pitch on the pipe. Everything is made of galvanized sheet metal.
A
935
15, 20
30, 40, 50, 60
21
B
E
F
G
500
400
585
615
560
16
710
21
Advertisement
Table of Contents
