GE Profile JS998SHSS Owner's Manual page 50

Before you call for service...
Troubleshooting Tips
Problem
Arcing between metal
surfaces in oven while
speedcooking or
defrosting
Display shows
"Miswired detected"
Option not seen on the
display screen
Hot air from oven
Food does not bake or
roast properly in the
oven
Food does not broil
properly
Clock and timer
do not work or
display goes blank
50
Possible Causes
Improper spacing between
metal surfaces and/or
aluminum foil.
Wiring from house to oven
is incorrect.
Option may be listed
on the next screen.
When using the cooking
features, hot air will exit
the oven through the vent
located above the door.
Oven controls improperly set.
Shelf position is incorrect
or the shelf is not level.
Incorrect cookware or
cookware of improper
size being used.
Oven temperature needs
adjustment.
Oven controls improperly set.
Improper shelf position
being used.
Cookware not suited
for broiling.
In some areas the power
(voltage) may be low.
The clock is in the
no clock mode.
Controls improperly set.
A fuse in your home may be
blown or the circuit breaker
tripped.
What To Do
• See Using the Trivection ™
• Contact installer or qualified electrician to check
house wiring to range.
• Select MORE to see additional items.
• This is normal.
• See the Using traditional bake and roast section.
• See the Using traditional bake and roast section.
• See the Using traditional bake and roast section.
• See the Adjust the oven temperature—Do it yourself!
section.
• Make sure you select BROIL.
• See the Broiling Guide.
• For best results, use a pan designed for broiling.
• Preheat the broil element for 10 minutes.
• Broil for the longest period of time recommended in
the Broiling Guide.
• See the Settings section for the oven clock.
• See the Using the clock and lower oven timer section.
• Replace the fuse or reset the circuit breaker.
Oven section.