EGO ST1520 Operator's Manual page 15

MOUNTING THE GUARD
WARNING:
of the blade on the guard and wear gloves to protect your hands from being injured by the
blade.
1. Remove the battery pack from the
trimmer.
2. Lay the trimmer on the ground or
the floor with the trimmer head
facing upward.
3. Align the two bolts, which are
preassembled on the guard, with
the two screw holes in the shaft
(Fig. 4), and then tighten them with
the supplied hex wrench (Fig. 5).
Always wear gloves when mounting or replacing the guard. Be careful
56-VOLT LITHIUM-ION CORDLESS 15" STRING TRIMMER
4
5
15