lapara LA-ON-DC Quick Manual

LA-ON-DC UPS Adapter

1. Package Contents

You should have received the following items inside of package:
- LA-ON-DC UPS adapter unit
- Quick Guide
If anything is missing or damage in the package, please contact your dealer.

2. Product Overview

A Restart/Off Button
B LED indicator
C DC output connector
D AC input
____________________________________________________
LA-ON-DC (V.1.3 2018)

3. Installation and Operation

Quick Guide V. 1.3
NOTE: Before installation, please inspect the unit. Be sure that nothing inside the package is
damaged.
Connect to Utility and Charging
Plug in the AC input plug (D) to the wall outlet. The UPS will be
automatically turned on and green LED will light on. If battery is
not fully charged, the UPS will auto charge battery and green LED
will flash.
Connect the Loads
Plug in the loads to DC output connector (C) of the UPS. Then, connected device will be
protected by UPS unit.
On/Off Button Operation
UPS will be automatically on when plugging into wall outlet under normal utility condition. If
UPS is in fault mode, pressing button to restart the UPS. If the UPS is operated in battery
mode, to avoid battery drain, please press and hold for 5 seconds to shut won the UPS. If the
utility is not available and battery is fully charged, you may simply press this button to turn on
the UPS.
_________________________________________________
LA-ON-DC (V.1.3 2018)