Equipment Installation And Operation; Connection To The Supply - Galileo MODC03B003 Manual

5. Equipment installation and operation

5.1 Connections to the supply
1. Ground the device. Use the DIN rail to ground connection of the
2. Connect the field circuit.
3. Connect the power supply & Modbus communication.
.
Danger!
Danger to life from incorrect installation
Incorrect installation of cables and connection lines can compromise the
function and the electrical safety of the device.
• Observe the permissible core cross-section of the conductor.
• When using stranded conductors, crimp wire end ferrules on the
conductor ends.
• Use only one conductor per terminal.
• When installing the conductors, the insulation must reach up to the
terminal.
• Observe the tightening torque of the terminal screws.
• Supply voltage fluctuations up to ±10 % of the nominal voltage.
Zener barrier for grounding.
9