Table of Contents
Advertisement
4. Mounting
Do not mount the device in the dust hazardous area.
Maximum supply voltage 24Vdc.
Operation ambient temperature -20°C to +45°C.
Altitude up to 2,000 m.
Maximum relative humidity 80 % for temperatures up to 31 °C
decreasing linearly to 50 % relative humidity at 40 °C.
The device fulfills a degree of Protection IP20 according to EN 60529
The Zener Barrier is secured to a DIN rail using a tab and screw.
Additionally, a snap-in spring mounting system and can be removed with
an Allen to remove the screw and then a flat head screw driver by
inserting the screw driver head in steel tab on the DIN rail side and
pulling or prying to overcome the spring's force.
Warning!
Advertisement!
The device must be use in PCB-vertical position!
L'appareil doit être utilisé en position verticale PCB!
8
Advertisement
Table of Contents
