Fitting/Removing Applicator Sponge - Silvercrest SMUV 3 A1 Manual

Fitting/removing applicator sponge

♦ Remove the protective cap
♦ Using light pressure, push a firm applicator sponge
applicator sponge
♦ Pull the respective applicator sponge
between your thumb and index finger.
NOTE
► Replace the protective cap
damage caused by make-up residues. This protects the applica-
tor sponge
tor mount
SMUV 3 A1
onto the applicator mount
/ currently being used as well as the applica-
.
.
/ off by grasping it
after every application to prevent
GB │ CY
or a soft
.
│
13 ■