Table of Contents
Advertisement
Using as a Towel Warmer
Note:
Turn off the power before removing the head, and ensure the device is cooled down.
•
Remove the steamer head by rotating it counter-clockwise, directing the arrow on
the head to the "unlocking" position (refer to Figure 2).
•
When in position, lift the head to remove.
•
Take a small, 100% cotton face towel and soak it with distilled or purified water.
Wring the towel to squeeze out the excess water until it is not dripping, then neatly
fold the towel and place it into the steamer body.
•
Replace the steamer head, rotating back to locking position (refer to Figure 3).
•
Connect the plug to a power outlet and rotate the Mode Selector switch to 'Warm
Towel'.
•
After two minutes of used, the towel will be warm and ready to use. Turn the Mode
Selector to 'off'.
Figure 2
Figure 3
Advertisement
Table of Contents
