Table of Contents
Advertisement
OPERATION
Using as a Steamer
1.
Connect the plug to a power outlet.
2.
Rotate the Mode Selector switch to
'Facial Steamer'.
3.
The LED indicator around selector switch
will turn blue. After approximately 1
minute, the steam will be released.
4.
Direct the steam to your face. Keep your
face at least 25 cm (10") away from the
spout (refer to Figure 1).
5.
When using the appliance for the first
time, use your hand to feel the steam
temperature at a 25 cm distance before
placing your face into position.
6.
To ensure that the steam covers your
entire face, direct the steam to the top of
your chin.
Note:
When done, turn the Mode Selector switch back to the 'Off' position.
Do not leave running, even when water is empty.
Figure 1
Advertisement
Table of Contents
