Ampetronic C Series Quick Start Manual

Box Contents

• 1 x C Series Driver including:
• 1 x Loop connectors (2x for dual channel
drivers)
• 1 x DC connector
• 1x Status relay connector (C10/14 only)
• 2 x Input connectors
• 1 x 100V line connector
This symbol is used to alert the user to important operating or maintenance instructions.
The Lightning bolt triangle is used to alert the user to the risk of electric shock.

1. SAFETY

1. It is important to read these instructions, and to follow them.
2. Keep this quick start guide in an accessible place.
3. Clean only with a dry cloth. Cleaning fluids may affect the equipment.
4. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
5. Do not install this equipment near any heat sources such as radiators, heating vents or other apparatus
that produces heat.
6. WARNING – THIS APPARATUS MUST BE EARTHED / GROUNDED.
7. Only power cords with the correct power connector may be used to maintain safety. Cables incorporating
the UK 13A fused plug, Schuko with earthing contacts and UL approved "grounding type" are acceptable.
These must be plugged into power outlets which provide a protective earth.
8. C10 and C14 amplifiers incorporate a mains voltage switch by the power socket on the rear of the unit.
Ensure this is set accordingly to the local mains supply voltage before connecting. Failure to do so may
damage the unit and would not be covered by warranty.
9. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in
any way, such as a power supply cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to any rain or moisture, does not operate normally
or has been dropped.
10. WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with
liquids, such as vases, shall be placed on the apparatus.
11. Warning: Connection to a 100V line system may involve the risk of electric shock and therefore
must be carried out by an instructed or skilled person.
Ampetronic C Series Quick Start Guide
C Series Quick Start Guide
Also includes:
TO PREVENT ELECTRIC SHOCK DO NOT REMOVE THE
COVER. THERE ARE NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL
• 1 x Line out connector
• 2 x 2mm steel 1U rack mount brackets
• 1 x C Series quick start guide
• 1 x Power cable (region specific)
• 1 x Induction Loop Sign
• 4 x self adhesive feet
Page 1