RGBlink TAO 1pro Manual page 2

More Information
Unpack, Connect, Power Up & Preview
IMPORTANT: When using HDMI connect before Power On.
Hot-plugged HDMI sources may not be detected
Preview Sources
Test your sources by previewing each input source
on screen.
Default view shows the
•
selected signal full screen
Source Status:
• Touch the screen to reveal
the UI controls
No Source Ready
• Touch the source HDMI or UVC label at
top left to see all sources and their status.
• Touch a source with a green button to
PVW that source. Button will flash yellow.
• Touch again, button will become red,
switching this source be the PGM live
output. If there is an HDMI monitor
connected, this source will display on the
monitor.
In PVW Live PGM