e-Line Technology ELI-EFB Quick Start Manual

Mounting
This is an indoor camera. It is not suitable for exposure to
particles or liquids.
Please note the camera's operating temperature of -10°C ~
45°C. Avoid using the camera at too high or too low
temperatures.
Never make the camera face the sun or bright object or you
may damage the image sensor.
Do not mount the camera near a radiator, heater, or other
heat source.
Caution: Once power is supplied, do not remove the
camera from the mounting base due to risk of electrical
shock.
This camera uses a standard mounting bracket, sold
separately.
This camera accepts lenses with a C/CS lens mount. Lens
sold separately.
Troubleshooting
No picture after providing power

Check the power connection to the power supply
to the power outlet for connectivity.

Check the power supply voltage.

Check all connecting cable and monitors for loose
connections.

Check the monitor settings
The picture has interference or ripples

This may be caused by the power supply's arc,
poor quality cable, too long cable, or improper
ground connection.
The picture background color changes continuously

A fluorescent light's electromagnetic field may
cause color roll. Reduce the number of
fluorescent lights or increase the distance
between the camera and the lights to reduce this
effect. Use of a power supply with external sync
may solve the problem.
Blurred Image

Check the dome cover for dirt or imperfections

Check the focus to make sure adjusted correctly

Check the lens of the camera to make sure it is
clean. Only use a dry, clean lens cloth to clean
the lens. Never touch with your fingers.
ELI-EFB / EEFB
Analog Full Body Camera
User Manuals and Specification Sheets are available at
http://eLineTechnology.com
Caution: Before providing power for the camera, please
read this Quick Start Guide or the User Manual in detail.
Do not attempt to disassemble the camera. If the camera is
not functioning properly, please contact your local
dealer/installer.
eLineTechnology.com