Cadillac CT4 Owner's Manual page 250

Cadillac CT4 Owner Manual (GMNA-Localizing-MidEast-15283644) - 2022 -
CRC - 7/28/21
250 DRIVING AND OPERATING
Warning
ACC has limited braking ability and
may not have time to slow the
vehicle down enough to avoid a
collision with another vehicle you
are following. This can occur when
vehicles suddenly slow or stop
ahead, or enter your lane. Also see
Alerting the Driver in this section.
Complete attention is always
required while driving and you
should be ready to take action and
apply the brakes. See Defensive
Driving 0 198.
Warning
ACC will not detect or brake for
children, pedestrians, animals,
or other objects.
Do not use ACC when:
On winding and hilly roads or
when the sensors are blocked by
snow, ice, or dirt. The system
Warning (Continued)
may not detect a vehicle ahead.
Keep the entire front of the
vehicle clean.
Visibility is low, such as in fog,
rain, or snow conditions. ACC
performance is limited under
these conditions.
On slippery roads where fast
changes in tire traction can
cause excessive wheel slip.
: Press to turn the system on or
off. The indicator turns white on the
instrument cluster when ACC is
turned on.
RES+ : Press briefly to resume the
previous set speed or to increase
vehicle speed if ACC is already
engaged. To increase speed by 1 km/h
(1 mph), press RES+ to the first detent.
To increase speed to the next 5 km/h
(5 mph) mark on the speedometer,
press RES+ to the second detent.
SET : Press briefly to set the speed
and activate ACC or to decrease
vehicle speed if ACC is already
engaged. To decrease speed by 1 km/h
(1 mph), press SET to the first detent.
To decrease speed to the next 5 km/h
(5 mph) mark on the speedometer,
press SET to the second detent.
: Press to disengage ACC without
erasing the selected set speed.
: Press to select a following gap
time (or distance) setting for ACC of
Far, Medium, or Near.
The speedometer reading can be
displayed in either English or metric
units. See Instrument Cluster (Base
Level) 0 89 or
Instrument Cluster (Uplevel) 0 91. The
increment value used depends on the
units displayed.