Yaesu FTV-1000 Operating Manual page 12

Operation
O
Operation of the FTV-1000 in conjunction with the
VL-1000 Linear Amplifier is basically identical to that
when using the amplifier with the MARK-V FT-1000MP
alone. Follow the installation guidelines shown on page
7 for interconnection of the station components. When
using the VL-1000, maximum power output during 6-
meter operation will be 500 Watts (minimum).
Page 10
PERATION WITH THE
VL-1000 L
INEAR
The operating procedure, when using the
transverter, is the same as when just operating the
MARK-V FT-1000MP (alone) with VL-1000. However,
you must be sure that you have set the VL-1000's ATT
switch "ON" position while operating on the 50 MHz
band, as you normally would on the HF band, when
exciting the VL-1000 with the FTV-1000.
A
MPLIFIER
FTV-1000 Operating Manual