Advertisement
Available languages
Available languages
Maintenance and Cleaning
Check and remove dirt regularly to ensure the long-term effi cient operation of your equipment.
1.Check the fi lthiness of the and IR-Filament at least once a month. The number of checks may be increased conside-
ring the amount of dust in the environment.
2.Visually inspect the condition of the,wire, frame,and lamp,and consult with after-sales staff if deformed
3.Unplug the power cord for your safety before cleaning your appliance. Make sure the heater is cool before continuing.
4.To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if
necessary. After cleaning, dry the unit with a soft cloth. (CAUTION: DO NOT let liquids enter the heater).
5.Do not touch the heating element with bare fi ngers, as residue from your hand could affect the life of the lamp. If it is
accidentally touched, remove the fi nger marks with a soft cloth moistened.
6.DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may
cause damage or deterioration to the surface of the heater.
7.DO NOT immerse the heater in water Wait until the heater is completely dry before use.
8.If the heater has collected dust or dirt inside the unit or around the heating element, have to unit cleaned by a qualifi ed
service agent. Do not operate the heater in this condition.
9.The only maintenance required is cleaning the external surfaces of the heater.
RECYCLING
At the end of the electrical products useful life it should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country
Advertisement
