Installation Instructions - ZIGBEE ZB15R Installation Instructions Manual

INSTALLATION INSTRUCTIONS

WIRELESS RANGE
This device can operate in range of open-air, line of sight transmission distances
of 100 feet. Actual performance in a home depends on the numbers of walls
between the gateway and the destination device. The advantage of the ZigBee
mesh network, every ZigBee device can work as a repeater to communicate
with other devices and extend signal rangeand to build a stable, reliable and
secure wireless ZigBee network. So there is no distance limited in a ZigBee
W A V E N E T W O R
Z - W A V E N E T W O R K
network. But there is still the following factor that impacts the RF range:
Things to consider regarding RF range:
Each wall or obstacle (i.e.:refrigerator, big screen TV, etc.)between the remote
or a ZigBee device and the destination device will reduce the maximum range
of 100 feet by approximately 25-30%.
Brick, tile or concrete walls block more of the RF signal than walls made of
wooden studs and plasterboard (drywall).
Wall mounted ZigBee devices installed in metal junction boxes will suffer a
significant loss of range (approximately 20%) since the metal box blocks a
large part of the RF signal.
Effects of Home Construction on Wireless Range Between
ZigBee Enabled Devices.
From the Remote (or repeating ZigBee module) to
destination device:
Type of Wood Frame with Brick, Tile or
Construction Drywall Concrete
Plastic Metal Plastic
J-Boxes* J-Boxes J-Boxes*
Number of 0** 100' 80' 100'
Walls or
1 70' 56' 60'
Obstacles
2 49' 39' 36'
3 34' 27' 21'
FCC COMPLIANCE STATEMENT
The equipment has been tested and found to comply with the limits for a Class B
Digital Device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interence in a residential installation.
This equipment uses, generates and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction, may cause harmful
interference to radio communication. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment dose cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-04-
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause
undesired operation of the device.
TROUBLESHOOTING
Cannot carry out pairing and unpairing or association
1. Confirm that the receptacle is powered.
2. Check if the wireless distance is too far.
The LED indicator does not turn ON
1. Check the wiring connection, especially the neutral wire.
2. Manually with the program button on the receptacle.
WARRANTY INFORMATION
Our company warranties its products to be free of defects in materials and work-
manship for a period of two(2) years. There are no obligations or liabilities on the
part of our company for consequential damages arising out of or in connection
with the use or performance of this product or other indirect damages with respect
to loss of property, revenue, or profit, or cost of removal, installation or reinstallation.
Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate this equipment.
Metal
J-Boxes
80'
48'
29'
17'
Sep, 2016
00056B
-05-