Changing The Filters; Care And Maintenance - Blueair Classic 400 Series User Manual

Changing the filters
IMPORTANT!
Always turn off and disconnect the unit from the supply mains before changing filters,
cleaning or carrying out maintenance
Step 1
Open the back door.
Step 3
Vacuum inside the unit with a soft brush at tachment.
Step 5
Close the back door, plug in the unit and turn on.
procedures..
Step 2
The unit is now ready for use.
Slide out the filter.
Step 4
Slide the replacement Blueair filter back into the unit.
General
1. Wipe the exterior of the unit with a soft, clean, damp cloth.
2. Never clean with gasoline, chemical solvents or corrosive material as
10 11

Care and maintenance

We recommend routine cleaning in order to keep your unit in top
condition. When changing filters
1. Wipe clean the underside of the lid after removal.
2. Vacuum the air inlet grille from the inside using a soft brush and/or other suitable
attachment. 3. Vacuum the small air inlets with a soft brush attachment.
these agents may damage the surface.
3. Do not allow foreign objects to enter the ventilation or exhaust
openings. This may cause elec tric shock or damage the unit.
4. Do not try to repair or adjust any of the electrical or mechanical
functions on your Blueair unit yourself. Contact your local dealer or
Blueair for warranty information.
Help and support
If you have questions about Blueair Classic series, please visit
www.blueair.com or contact your local Blueair retailer.
Warranty information
The Blueair Limited Warranty applies only if the unit is used according
to the instructions in this manual.