Filters
General information
The unit is delivered with one HEPASilent
Particle filters
remove:
PM2.5
Dust
Pollen
SmokeStop
Dust mites
Bacteria
VOC
IMPORTANT! Use only genuine Blueair filters to ensure proper function of your unit and to
qualify for full warranty coverage.
Filter checklist
To make it easy to find the right filter in the future, please fill in the customer record below and keep
this user manual for reference. The model number and serial number of this product can be found on
the rating label on the bottom of the unit.
Model number
Serial number
Date of purchase
Blueair filter subscription program
This convenient service is available in some countries – contact your local Blueair retailer to find out if
you can join.
10
TM
filter already installed.
Pet dander
Mold
filters
remove all the above pollutants, plus:
TM
Smoke
Chemicals
Cooking odors
Retailer's name
Retailer's address
Telephone number
IMPORTANT!
Always turn off and disconnect the unit from the supply mains before changing filters, cleaning or
carrying out maintenance
Changing the filters
Step 1
Open the back door.
Particles
Step 3
Vacuum inside the unit
with a soft brush
attachment.
Step 5
Close the back door,
plug in the unit and
turn on.
The unit is now ready
for use.
procedures..
Step 2
Pull out the filter.
Step 4
Insert the replacement
Blueair filter.
Status orange - replace filter and
reset by pressing down for 5 seconds.
11