Table of Contents
Advertisement
Note:
1. After replacing the Cylinder Unit, press COUNTER RESET button
on remote in this mode. Total elapsed "Cylinder rotation" time (in
hours) will be cleared to 0.
2. To release from Usage Screen Mode, press any operation button
on VCR or insert a cassette tape in this mode. The VCR will return
to normal operation mode.
4.1.3. EEPROM IC (IC6005), MAIN C.B.A. REPLACEMENT NOTE
After replacing EEPROM IC (IC6005) or Main C.B.A., be sure to perform the "PG SHIFTER
ADJUSTMENT" in ELECTRICAL ADJUSTMENT procedures.
4.1.4. SERVICE POSITION
4.1.4.1. Service Position
CAUTION:
HOT CIRCUIT (Primary circuit) exists on the Main C.B.A.
Use extreme care to prevent accidental shock when servicing.
4.1.4.1.1. Service Position (1)
4.1.4.1.2. Service Position (2-1)
(Normal Frame Model)
Fig. 3-1
Fig. 3-2-1
8
Advertisement
Table of Contents
