Elecom UCAM-CX80FBBK User Manual page 14

The installation of the UCAM-CX80FB settings software is now complete.
* Tick "Launch UCAM-CX80FB" to run the UCAM-CX80FB settings software after installation.
■Set up using the UCAM-CX80FB settings software
1) Run the software with the camera connected to your PC.
Click "ELECOM" then "UCAM-CX80FB" in order from the start menu.
The UCAM-CX80FB settings software will start running.
The following message will appear if the camera is not connected to your PC.
Please connect the camera to your PC.
2) Click the frame operations icon
and image quality.
■Description of software window
① Frame operations icon
Control the operations of frames.
Switch between showing and hiding frames.
Show the Settings frame.
to set up camera range during shooting