Using The Scanner - Canon P-150 Reference Manual

Using the Scanner

Setting the Auto Start switch on the rear of the scanner allows you to use the scanner in the following two ways.
When Using the Scanner with the Auto Start Switch Set to
ON
Scanning with the Scanner Internal Software
CaptureOnTouch Lite is preinstalled on this scanner. Therefore, you
can scan from a computer that does not have a scanner driver
installed. Scanned images can be stored in any location on the
computer connected to the scanner.
(See "Scanning with CaptureOnTouch Lite" on p. 11)
Hint
Software installation is not necessary for using the internal scanner software, CaptureOnTouch Lite.
10
CaptureOnTouch Lite
When Using the Scanner with the Auto Start Switch Set to
OFF
Installing the Supplied Software and Scanning
CaptureOnTouch
By installing the scanner driver stored on the software setup disc, you
can use applications such as the supplied CaptureOnTouch.
(See "Scanning with CaptureOnTouch" on p. 16)
Software Setup
Disc (DVD-ROM)