J.Burrows JB3TMTLSWE Assembly Lnstructions

Assembly lnstructions for 3 Shelf Metal Shelving
887W x 354D x 914H mm
A
C
Important: Be sure to line up and match hole pattern
on all posts prior to assembly.
Place post upright, using cardboard or other safeguard
beneath post to protect floor. Insert tabs on long shelf
support apron into slots on post. Press on tabs with fingers
to guide into slots. Push down lightly to extend tabs
through slots. It is recommended that the bottom shelf
aprons be placed in the second and third slots from the
bottom. To ensure stability of the unit, do not place bottom
shelf aprons any higher than the sixth slot.
Part No:JB3TMTLSWE
FOR SAFETY
2 people are recommended for assembly
BE CAREFUL of sharp edges when assembling.
DO NOT stand on this product or use as a ladder.
DO NOT alter this product in any manner that is not intended. This may
cause product damage or personal injury.
Position the product on a level surface.
The maximum loaded weight for each shelf is no more than
distributed.
When loading shelves please distribute items evenly with heaviest items on
the bottom shelf.
Fasten the unit to the wall whenever possible with proper fasteners
(not provided)
B
ool for assembly
T
D
E
1
90kg. evenly
PARTS LIST
A. Posts (4)
B. Shelves (3)
C. Long Apron (6)
D . Short Apron (6)
E. Plastic Floor
Protectors (4)
2nd & 3rd slots