System Shutdown / Power Off; Troubleshooting; Information On The Support And Update Of Windows; Installation Of Uwp App - LG 14Z95P Series Owner's Manual

When the AC adapter is connected, the AC adapter lamp turns on.
Status
On
Off
• If you try to turn on the system that has entered the Hibernates mode or been turned
off after a low-battery alarm, the system will not be turned on but the lamp will
blink three times. If this is the case, connect the AC adapter and charge the battery
sufficiently before using it.
Precautions When Using the AC Adapter
!
Do not excessively bend the AC adapter cable.
• Otherwise, the wires inside the cable may break and cause an electric shock or fire.
All-in-one Adapter
Power Lamp
The AC adapter is connected.
The AC adapter is not connected.
Detachable Adapter

System Shutdown / Power Off

Press the [ ] key or [Ctrl]+[ESC] to display the Start menu.
- Press the Start button [ ] > Power button [

Troubleshooting

Information on the Support and Update of Windows

- Depending on the product, some of the Windows functions may not be supported,
and you may need to purchase a separate hardware, driver, or software to use the
functions. Also, you may need to update the BIOS additionally. The Auto Update
function of Windows is always activated. Updating Windows may incur Internet usage
fees as well as additional system requirements for the storage device or the hardware.
For more information, refer to the website https://www.microsoft.com.

Installation of UWP App

- The UWP app provided by LG Electronics can be installed only through the
Microsoft Store. Access Microsoft Store and search for the app to install it.
For more information on the app, refer to LG Easy Guide.
The screen color does not properly display�
- Check if the Reader Mode is turned on. If the Reader Mode is on, press the [
on the bottom right of the taskbar to turn it off.
- Using the Reader Mode and the Night light at the same time can cause color distortion.
Set the Reader mode to [Off] or set the Night light to [Off].
• Turning off Night light: Press the Start button [
[System] > [Display] > [Night light] > [Off].
- If the screen still does not properly display, contact the LG Electronics service center.
• Reader mode controls the brightness and color of the LCD screen to look like printed
paper and protect the user from eyestrain.
System Shutdown / Power Off 4
] and select [Shut down].
] icon
] and select Settings [ ] >