Advance Tabco SU-16 Disassembly Instructions

Glass rinsers

Advertisement

Disassembly Instructions For Cleaning
SU-16/SU-16UM Glass Rinsers
CHECK FOR CONCEALED DAMAGE
FILE CLAIM WITH DELIVERING FREIGHT CARRIER

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SU-16 and is the answer not in the manual?

Questions and answers

Summary of Contents for Advance Tabco SU-16

  • Page 1 Disassembly Instructions For Cleaning SU-16/SU-16UM Glass Rinsers CHECK FOR CONCEALED DAMAGE FILE CLAIM WITH DELIVERING FREIGHT CARRIER...
  • Page 2 3-4 bay sink prior to using the glass rinser. This prevents the spread germs and/or viruses and prevents debris from collecting/clogging the glass rinser pan or drain. Disassembling The SU-16/SU-16UM Glass Rinser STEP 1: Remove the outer grate: Using a small screwdriver, gently pry out the outer grate.
  • Page 3 STEP 2: Remove the inner grate: Place s small screwdriver through a hole in the grate, into the drain hole of the rinser to hold the grate in place and prevent it from spinning (Figure 2). (Figure 2) STEP 3: While holding the screwdriver in position, use a 18 mm or 3/4”...
  • Page 4 For Further Assistance Contact Customer Service at: 800-645-3166 customer@advancetabco.com Hauppauge, New York 11788 ©ADVANCE TABCO SEPTEMBER 2021...

This manual is also suitable for:

Su-16um

Table of Contents