Color Lcd; Left/Right Rotary Encoders - Aviom A640 User Manual

Press either encoder button to scroll to the Treble, Bass, or Enhance settings. Then turn the encoder
to change the amount. The Treble and Bass controls offer boost or cut. Scroll to the left of the center
indicator (the default setting) for a Treble or Bass cut; scroll to the right for a boost.
The Enhance circuit is a specially designed boost-only feature that adds a simultaneous bass and
treble boost at varying amounts as you increase its level. Its specially designed EQ curve is ideal for
in-ear monitoring. The default setting for Enhance is fully left (off ). The settings for the Master EQ will
save with each mix preset created on the A640.
To return the Treble, Bass, and Enhance controls to their default values, press the

Color LCD

The central LCD (Liquid Crystal Display) shows the current mix in one of three Views. The LCD is also
used with the Master EQ and when setting up the A640 Personal Mixer using the options in the Mixer
Setup window.
Signal/Clip
Ambience

Left/Right Rotary Encoders

Two rotary encoders with push button switches are found on either side of the display. The encoders
are used for creating and editing a monitor mix, setting up an Aux Mix, creating a custom channel
map, setting up preferences in the Mixer Setup window, etc.
3 4 5
Aviom A640 Personal Mixer User Guide
View
Channel
Mix
Names
Color LCD as seen in Channel View
6 7 8
Mixer Setup
Trim All
9 10 11
R
button.
eSet
12 13 14
Aux Volume M
15 16
Page 14