Samsung WW9 TA Series User Manual page 53

Code
UC
HC
1C
AC
0
If any information code keeps appearing on the screen, contact a local Samsung service centre.
Untitled-1 53
The electronic control needs to be checked.
• Check if power is supplied properly.
• If the information code remains, contact a customer service centre.
Low voltage detected.
• Check if the power cord is plugged in.
• If the information code remains, contact a customer service centre.
High temperature heating check.
• If the information code remains, contact a customer service centre.
The Water Level sensor is not working properly.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service centre.
Check communications between main and sub PBAs.
• Try power off and restarting the cycle.
• If the information code remains, contact a customer service centre.
The machine does not turn off automatically after the last spinning process, and
the "0" message remains.
• The machine operates normally without running the
However, it is recommended to run the cycle for hygienic purposes.
Action
DRUM CLEAN cycle.
English 53
2020-08-28 3:41:53