Panasonic SA-AK78 Service Manual page 82

SB-AK78
1 Connection of the
Speaker Cables
• Be sure to connect speaker cables before connecting the
AC power supply cord.
• The load impedance of any speaker used with this unit must
be 6Ω.
• Be sure to connect the cable from the right speaker to the
roght terminal and the cable from the left speaker to the left
terminal.
1. Strip off the outer covering, and twist the center conductor.
Make sure the bare ends of the wires are not unravelled. (If
they are, twist them toght again.)
2. Insert the wire to the rear panel of the unit and close the
lever.
2 Schematic Diagram
All manuals and user guides at all-guides.com
Notes :
2
• To prevent damage to circuitry, never short-circuit positive
(+) and negative (-) speaker wires.
• Be sure to connect only positive (red) wires to positive (+)
terminals and negative (black) wires to negative (-)
terminals.