Connecting One Radio Base Station To The Main Distribution Frame And Two Radio Base Stations To The Expansion Distribution Frame; Figure 11: Connecting One Radio Base Station To The Main Distribution Frame And Two Radio Base Stations To The Expansion Distribution Frame - Matra Nortel MC 6500 Manual

3.3.7 CONNECTING ONE RADIO BASE STATION TO THE MAIN DISTRIBUTION
FRAME AND TWO RADIO BASE STATIONS TO THE EXPANSION DISTRIBUTION
FRAME
Figure 11: Connecting one radio base station to the main distribution frame
and two radio base stations to the expansion distribution frame
On the main distribution frame, configure radio base station 1 as "master".
Connect slave radio base station 2 to strip J4 (pins 1 to 4) and slave radio base station 3 to
strip J4 (pins 5 to 8).
Connect the two synchro wires to strip J5 (pins 1 and 2 for radio base station 2 and pins 3
and 4 for radio base station 3).
Connect pins 1 and 2 of strip J5 (ROCYE card) to pins 1 and 2 of strip J6 (ROCZB card).
Note: The printed circuit card connects all plus (+) wires to one another. It also
connects all minus (-) wires "-" on strip J5.
LCAH-30521-001-05=01/EN
This confidential document is the property of MATRA NORTEL COMMUNICATIONS and may not be copied or circulated without permission.
Ce document confidentiel est la propriété de MATRA NORTEL COMMUNICATIONSet ne doit pas être reproduit ou communiqué sans autorisation.
PAGE 47/171